HD via 1 x auto-detecting HDMI input to 1 x DVB-T out Modulator
The HDM1 has been specifically designed in a low cost stand alone case for convertingexisting HDMI/DVI output from any source into a single High Definition ‘Freeview’ compatibledigital multiplex for further distribution and viewable on any ‘Freeview’ HD tuner equippedtelevision.
The HDM1 works by offering the incoming HDMI signal into an MPEG-4 encoder whereby thesignal is then modulated into a standard 8MHz COFDM multiplex.
Programmed via the front panel, a simple menu based setup screen allows the titling (up to15 characters) and channel numbering with a whole host of extra features, such as channeltuning and level adjustment.
Use for creating DVB-T from a multitude of HDMI/DVI sources including: satellite receivers,computers, Blu-ray players, media and digital signage players.
Video: 1 x HDMI / DVI
Connectors: HDMI, f connector for a terr. loop through
Audio compression: MPEG 1 layer II 192Kbits/s
Video compression: H.264/MPEG-4 AVC
Resolution: 1080i/p, 720p, 576i/p @50/60Hz
Insertion of PSI/SI tables: PAT, PMT, SDT, NIT
LCN processing: European norm / full UK LCN support
Editable Channel and Info titles: YES
Output standard: ETSI EN 300 744 (DVB-T)
Carriers: 2K, 8K
Output format: COFDM,16QAM, 64QAM
Channel bandwidth: 6, 7, 8MHz
Output frequencies: 100...860MHz
Maximum output level: 90 dBµV
Output attenuation: 0…-15dB
MER (typical): 33dB
Connector: f connector
Power consumption: 8W
Temperature range: 0…+45ºC
Local interface: LCD + buttons
A suitable graphic card generating Video/static HD quality graphics can be converted to DVB-T (‘Freeview’ HD compliant).
This can then be distributed around conference areas, hotels, hospitals, prisons, schools, gyms or any commercial/private premises using existent coaxial distibution.